The pneumatic or electric powered Tube & Pipe end preparation machine PROTEM SE-NG Series are lightweighted and portable. It will perform repeatable perfect quality weld preps on all metal tubes and pipes including mild, stainless steel, exotic alloys such as inconel, P91, hastelloy, copper etc… The SE-NG Series allows to cover diameters ranging from 0.393“ to 8.622“ (10mm-219mm). The cutting head will face, bevel and counterbore individually or in a simultaneous operation. The toolholder plate can hold up to 4 tool blocks.
The tool-holder plate is easily removable and thus allows the operator to save time once the tool blocks have been adjusted by exchanging the whole plate. The SE-NG machines are available with either pneumatic or electric (220 V or 110 V) drives. It clamps to the tubes and pipes by means of a heavy clamping collet and thus provides a chatterfree accurate finish.
SE-NG Series Advantages
• Portable
• Powerful Machining Equipment
• Easy and Safe use for the Operators
• No Heat Affected Zone
• High Accuracy
• Fast and easy mounting
• Perfect and repeatable welding preparation
• Adapted for works in tight spaces
• The machine can be used in all positions: vertical, horizontal, over head
• The tool-Inserts can be changed and adjusted very quickly
• Smooth and Burr-Free Surface Finish
• No vibration during the machining process
SE60NG
Technical Features
| Standard Capacity: | 0.393“ – 2.374“ (10mm – 60.3mm) |
| Specific shapes & angles: | I, V, J-bevel, Other on Requests |
| Clamping: | Manual |
| Feed stroke: | 0.98“ (25mm) |
| Gear drive: | 60 rpm to 90 rpm |
| Pneumatic drive: | 730 W, 6 bar (87 psi), 1400 l/min (49 cfm) |
| Electrical drive: | 110 V (1500 W) or 220 V (1050 W) |
SE90NG
Technical Features
| Standard Capacity: | 0.393“ – 3.543“ (10mm – 90mm) |
| Specific shapes & angles: | I, V, J-bevel, Other on Requests |
| Clamping: | Manual |
| Feed stroke: | 1.18“ (30mm) |
| Gear drive: | 75 rpm to 90 rpm |
| Pneumatic drive: | 1500 W, 6 bar (87 psi), 2800 l/min (100 cfm) |
| Electrical drive: | 110 V (1500 W) or 220 V (1050 W) |
SE120NG
Technical Features
| Standard Capacity: | 1.968“ – 4.724“ (50mm – 120mm) |
| Specific shapes & angles: | I, V, J-bevel, Other on Requests |
| Clamping: | Manual |
| Feed stroke: | 1.18“ (30mm) |
| Gear drive: | 60 rpm to 75 rpm |
| Pneumatic drive: | 1500 W, 6 bar (87 psi), 2800 l/min (100 cfm) |
| Electrical drive: | 110 V (1500 W) or 220 V (1050 W) |
SE219NG
Technical Features
| Standard Capacity: | 2.374“ – 8.622“ (60.3mm – 219mm) |
| Specific shapes & angles: | I, V, J-bevel, Other on Requests |
| Clamping: | Manual |
| Feed stroke: | 0.9“ (23mm) |
| Gear drive: | 33 rpm |
| Pneumatic drive: | 730 W, 6 bar (87 psi), 1400 l/min (49 cfm) |
| Electrical drive: | 110 V (1500 W) or 220 V (1050 W) |
