The OD Mounted Facing machine clamps on the outside Ø of the tube with clamping collets. One collet per Ø is necessary. No distortion of the tubes, even for the thinnest ones. Powered: Electrically or with cordless electric drive. The tube facing machine can be mounted onto a bench support.
0.118“ – 1“
(3mm – 25.4mm)
0.5“ – 2.5“
(12.7mm – 63.5mm)
0.118“ – 2.5″
(3mm – 63.5mm)
SE Series Advantages
• Portable
• Powerful Machining Equipment
• Easy and Safe use for the Operators
• No Heat Affected Zone
• High Accuracy
• Fast and easy mounting
• Perfect and repeatable welding preparation
• Adapted for works in tight spaces
• The machine can be used in all positions: vertical, horizontal, over head
• The Tool-Inserts can be changed and adjusted very quickly
• Smooth and Burr-Free Surface Finish
• No vibration during the machining process
Technical Features
| Specific shapes & angles: | I and V |
| Clamping: | Manual |
| Feed stroke: | 0.394“ (10mm) |
| Gear drive: | Level 500 rpm Level 1700 rpm |
| Electrical or Cordless drive: | 110 V (1100 W) or 220 V (1300 W) |
Tube Squaring Machines with Angle Drive
The OD Mounted Facing machine with angle drive clamps on the outside Ø of the tube with clamping collets. One collet per Ø is necessary. No distortion of the tubes, even for the thinnest ones. Powered: Electrically or with cordless electric drive. The tube facing machine can be mounted onto a bench support.
0.118“ – 1“ (3mm – 25.4mm)
0.5“ – 2.5“ (12.7mm – 63.5mm)
Technical Features
| Specific shapes & angles: | I |
| Clamping: | Manual |
| Feed stroke: | 0.394“ (10mm) |
| Gear drive: | 700 rpm |
| Electrical or Cordless drive: | 110 V (1100 W) or 220 V (1300 W) |